PRE-DELIVERY INSPECTION
169603
40
Revision
B
Lubrication Points (cont’d)
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do
not
over grease. If more than 6 to 8 pumps of the
grease gun are required to fill the cavity, replace
the seal in the sickle head.
Check for signs of excessive heating on
first few guards after greasing. If
required, relieve pressure by depressing
check-ball in grease fitting.
SICKLE HEAD
(SINGLE KNIFE - 1 PLC)
(DOUBLE KNIFE - 2 PLCS)