UNLOADING AND ASSEMBLY
169603
25
Revision
B
STEP 9.
INSTALL CROP
DIVIDERS
a. Dividers are stored on inboard side of endsheets.
To remove, support the divider and remove
shipping wire at front end (A), and then remove
bolt (B).
b. Remove bolt and washer at (C).
c. Position crop divider as shown by locating lugs (D)
in slots (E) in endsheet.
d. Lift forward end of divider up to endsheet, and
install washer and bolt at (C).
e. Check that divider does not move laterally. Adjust
bolts (E) as required to tighten divider, and
remove lateral play when pulling at divider tip.
E
B
A
C
D
E
C