UNLOADING AND ASSEMBLY
169603
16
Revision
B
NOTE
Steps g. to m. apply only to Double Reel
headers.
g. Remove sling, and reposition around reel tube
near reel center support arm.
h. Lift reel to gain access to the center lift cylinder.
i.
Remove shipping wire/banding from center reel lift
cylinder.
j. Remove socket head bolt and nut from cylinder
rod end.
k. Attach rod end of cylinder to reel arm with socket
head bolt and nut. Access hardware through holes
in reel arm braces
l.
Remove pin at barrel end of cylinder.
m. Adjust reel height so pin can be installed at barrel
end of cylinder and mounting structure.
n. Remove sling, and reposition around reel tube
near opposite outboard reel arm.
o. Remove shipping wire/banding from cylinder, and
remove pins from lug and arm.
p. Lift reel so that reel lift cylinder mounting holes line
up with lug on endsheet and hole in reel arm.
q. Secure cylinder to endsheet and reel arm with
pins as shown.
NOTE
Cotter pin outboard at reel arm;
Cotter pin inboard at endsheet.
(continued next page)
DOUBLE REEL
CENTER ARM - DOUBLE REEL ONLY