Mac allister Titan TTK550LWM Скачать руководство пользователя страница 35

Страница: 35 / 44

Care and maintenance

Engine

Follow all the instructions in the engine manual.

The engine oil is emptied using a syringe (2)

(attachment on request) suited for that use, after

unscrewing the cap (1).
Fit a small pipe (3) of the right size and at least

400mm long on to the syringe (2) ; push the small

pipe (3) into the hole completely, then suck all the

oil out; please remember that this operation has to

be repeated a few times to empty it completely.

Rear axle

This is a sealed single unit that does not require maintenance. It is permanently lubricated

and its lubricant does not need changing or topping up.

Battery

To ensure long life to the bat-

tery it is essential to keep it

carefully maintained.

The machine battery must

always be charged:

– before using the machine

for the first time after pur

chase;

– before leaving the machine

disused for a long period;

– before starting up the ma-

chine after a prolonged

period of inactivity.

Carefully read and observe the battery recharging instructions in the booklet provided with

the battery. Failure in following the procedure or in charging the battery could permanently

damage the battery elements. A flat battery must be recharged as soon as possible.

IMPORTANT

Recharging must be done using a battery charger at constant voltage. Other

recharging systems can irreversibly damage the battery.

The machine comes with a connector (1) for recharging; this is connected to the corre-

sponding connector for the special maintenance battery-charger supplied (if included) or

available on request (

page 6, n. 4) .

IMPORTANT

This connector must only be used for connection to the maintenance bat-

tery-charger indicated by the Manufacturer. For its use:

– follow the instructions given in the relative instructions manual;

– follow the instructions in the battery manual.

mor

detail

...

TTK550LWM by TITAN

Содержание Titan TTK550LWM













































Результаты поиска

Содержание Titan TTK550LWM

Отзывы:

Похожие инструкции для Titan TTK550LWM

Бренды по названию

Популярные бренды

Mac allister Titan TTK550LWM, Руководство пользователя

Результаты поиска

Содержание Titan TTK550LWM

Отзывы:

Похожие инструкции для Titan TTK550LWM

Бренды по названию

Популярные бренды