Operation
Tyre pressure
Having the right tyre pressure is the main condition for ensuring that the cutting-means as-
sembly is horizontal and mows evenly.
Unscrew the valve caps and connect a compressed air line with a gauge to the valves and
adjust the pressure to the indicated values.
Filling with oil and fuel
NOTE
The type of oil and fuel to use is given
in the engine manual.
To reach the oil dipstick, turn the seat over and
remove the cover underneath.
With the engine off, check the oil level. Accord
-
ing to the instructions in the engine manual, this
must be between the MIN and MAX marks on
the dipstick.
Refuel using a funnel, but do not completely fill
the tank.
DANGER!
Refuelling should be carried
out in an open or well-ventilated area with
engine stopped. Always remember that pet-
rol fumes are inflammable. DO NOT TAKE A
NAKED FLAME TO THE TANK’S OPENING
IN ORDER TO SEE THE TANK’S CONTENTS
AND DO NOT SMOKE WHEN REFUELLING.
IMPORTANT
Do not drip petrol onto the plas-
tic parts to avoid ruining them. In the event of ac-
cidental leaks, rinse immediately with water. The
warranty does not cover for damage to plastic
parts of the bodywork or the engine caused by
petrol.
In
mor
e
detail
...
25
GB
IE
TTK550LWM by TITAN
