Mac allister Titan TTK550LWM Скачать руководство пользователя страница 32

Страница: 32 / 44

Operation

Storage and inactivity for long periods

If you intend not to use the machine for a long period

(more than 1 month), disconnect the battery cables and

follow the instructions in the engine instruction manual.

Close the fuel stopcock (1).

Remove the clamp (2) using pliers, reconnect the tube

(3) and empty the tank collecting all the fuel in a suitable

container.

Open the tap (1) and start the engine, leaving it running till

it stops because all fuel left in the tubes and carburettor

has been used up.
Reconnect the tube (3) making sure you position the

clamp properly (2).
Put the machine away in a dry, sheltered place and preferably covered with a cloth

(

page 6, n. 3).

IMPORTANT

The battery must be kept in a cool and dry place. Before a long storage pe-

riod (more than 1 month), always charge the battery, and then recharge before using again.

The next time the machine is used, check that there are no fuel leaks from the tubes, fuel

stopcock or carburettor.

USING ON SLOPES

Observe the indicated limits (max 10° - 17%).

WARNING!

Take care when be-

ginning forward movement on sloping

ground to prevent the risk of tipping

up. Reduce the forward speed before

going on a slope, particularly downhill.

DANGER!

Never switch to reverse

gear to decrease speed when going

downhill: this could cause loss of con-

trol of the machine, especially on slip-

pery ground.

Mechanical transmission

DANGER!

Never ride the machine on slopes in neutral or with the clutch out!

Always shift into a low gear before leaving the machine at a standstill and unat-

tended.

Hydrostatic transmission:

Drive down slopes with your foot off the drive pedal (

page 23, n. 22) to use the

braking effect of the hydrostatic transmission when the transmission is not engaged.

mor

detail

...

TTK550LWM by TITAN

Содержание Titan TTK550LWM













































Результаты поиска

Содержание Titan TTK550LWM

Отзывы:

Похожие инструкции для Titan TTK550LWM

Бренды по названию

Популярные бренды

Mac allister Titan TTK550LWM, Руководство пользователя

Результаты поиска

Содержание Titan TTK550LWM

Отзывы:

Похожие инструкции для Titan TTK550LWM

Бренды по названию

Популярные бренды