Operation
Mechanical transmission
11. CLUTCH / BRAKE PEDAL
This pedal has two functions: during the first part of its
travel it acts as a clutch, engaging and disengaging drive
to the wheels, and in the second part it acts as a brake on
the rear wheels.
IMPORTANT
Do not keep the pedal half way between
clutch engagement or disengagement, as this can cause
overheating and damage the transmission belt.
NOTE
When the machine is in movement, keep your
foot off the pedal.
12. SPEED CHANGE LEVER
This lever has six positions for the four forward speeds,
the neutral position «N», and reverse «R».
To go from one speed to another, press the pedal (4.11)
halfway and shift the lever as shown on the label.
WARNING!
Reverse must be engaged when the
machine has stopped.
Hydrostatic transmission
21. BRAKE PEDAL
This pedal works the brake on the rear wheels.
22. DRIVE PEDAL
This pedal engages drive in the wheels and controls the
machine’s forward and reverse speed.
– To engage forward gear just press it in the «F» direction
with the tip of your foot, noting that increasing the pres-
sure on the pedal progressively increases the speed of
the machine.
– Reverse is engaged by pressing the pedal with the heel
towards «R».
– The pedal automatically goes into neutral «N» when re
-
leased.
WARNING!
Reverse must be engaged when the
machine has stopped.
NOTE
If the drive pedal is used, whether forwards or for
reverse, when the parking brake (4.2) is engaged, the en-
gine stops.
In
mor
e
detail
...
22
TTK550LWM by TITAN
GB
IE
