Operation
– In disengaging the cutting means (Pos. «A»), a brake is simultaneously activated which
stops their rotation within five seconds.
4. CUTTING HEIGHT ADJUSTMENT LEVER
This lever has several positions so the cut can be regulated at
various heights.
– To go from one position to another, move the lever side-
ways and put it back in one of the stop notches.
5. KEY IGNITION SWITCH
This key operated control has three positions:
«OFF» everything is switched off;
«ON» activates all parts;
«START» engages the starter motor.
– On being released at the «START» position, the key will automatically return to «ON».
6. THROTTLE LEVER
Regulates the engine’s r.p.m. The positions are indicated on
the plate showing the following symbols:
«CHOKE» ((if provided) cold start
«SLOW» for minimum engine speed
«VELOCE» for maximum engine speed
– The «CHOKE» position (if provided) enriches the mixture so it must only be used for the
time necessary for cold starts.
– When moving from one area to another, put the lever in a position between «SLOW» and
«FAST».
– When cutting, shift into «FAST».
7. REVERSE GEAR CUTTING CONSENT PEDAL
By pressing and holding the pedal down, it is possible to
switch to reverse gear with the cutting means engaged with-
out causing the engine to stop.
In
mor
e
detail
...
21
GB
IE
TTK550LWM by TITAN
