Before you start
FITTING THE REAR PLATE
• Use equipment marked “A”.
Apply plates (1) to the two supporting brackets (2)
and (3), as shown in the figure.
Screw (4) the two brackets (2) and (3) to
the chassis supports, taking care they are
in the correct right and left positions.
Mount the lower part (5) of the rear plate
and screw (6) it to the lower brackets without
tightening the screws completely.
Hydrostatic transmission
– Make sure the release lever (7) is in-
serted in the rear plate groove correctly
and that it runs freely.
Tighten screws (6).
FITTING THE DASHBOARD AND STEERING WHEEL
• Use equipment marked “B”.
Put the machine on a flat surface and
straighten the front wheels.
Fit the caster (3) on the steering column (2),
making sure the plug (1) is correctly fitted
into the caster seat.
Fit the steering column extension (3a) in the
hole in the caster (3).
15
GB
IE
Getting
star
ted
...
TTK550LWM by TITAN
