M86 Security M86 Threat Analysis Reporter, Руководство пользователя

Страница: 217 / 938

WF G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM SCREEN
M86 S
ECURITY
U
SER
G
UIDE
189
Configuration
Set up Blocking Criteria
1. At Reset the X-Strike count upon authentication , “Off”
is selected by default. To have all strikes reset before an
end user is authenticated, click “On”.
2. Enter the Maximum Strikes Before “Locking” the
Workstation . This is the number of attempts a user can
make to access an unacceptable site before that user is
prevented from using the Internet. The default is
5 , and
the maximum limit is 1000.
3. Enter the Time Span in Minutes to Track the No. of
Strikes Within Category . This is the amount of time
between a given user's first strike and the strike that will
lock out that user from his/her Internet access. The
default setting is
5 , and the maximum limit is 1440
minutes (24 hours).
4. Enter the number of seconds for the Flood Tolerance
Delay , which is the maximum amount of time that will
elapse before a user who accesses the same inappro-
priate URL will receive another strike. The default setting
and the maximum limit is
4 seconds.
5. Specify the “Locked” Life Time (Measured in
Minutes)
, which is the number of minutes a user's work-
station will be locked. Choose either “Unlimited”, or
“Defined”.
If “Defined” is selected, enter the number of minutes in
the text box. The default setting is
5.
6. Specify a Redirect URL to be used when the end user is
locked out from his/her workstation. By default, “Default
"Alternate" Locked Block Page” is selected, indicating
that the standard lock out block page will display.