M-Audio code25, Руководство пользователя

Страница: 96 / 115

96
Mackie Control
®
and HUI
®
Your Code Series keyboard can send messages using the Mackie Control
®
or HUI
®
(Human
User Interface) protocols rather than standard MIDI communication. You must first select
which one it will use.
Remember that the faders, buttons, and/or encoders you want to use with this protocol must
be set to Mackie Control/HUI Mode for this to work properly. See
Basic Concepts > Control
Modes to learn about this.
Using either protocol does not affect the pads or keyboard.
To select the Mackie Control or HUI protocol:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press and hold Shift , and then press the Curve / Mackie / HUI key. Each time you press it,
it will switch between the Mackie Control protocol or HUI protocol. The current mode will
appear in the
display .
3. To confirm your selection, wait for 1 second. You will exit Edit Mode automatically.
Using Mackie Control
When your faders, buttons, and/or encoders are in Mackie Control/HUI Mode, their respective
Fader Mode , Button Mode , or Encoder Mode button will be lit green .
Use the Bank Right / Left (

) buttons to move to another bank of tracks.
Important note if you are using Code 25: In your DAW, it may look like you are controlling 8
tracks, but you can control only 4 tracks at a time. When you press one of the Bank
Right / Left (

) buttons, you will control only the next/previous 4 tracks.
When using the Mackie Control protocol, each of the controls will do the following:
•
Faders: Moving the faders will adjust the volume of each track.
•
Buttons: Pressing the buttons will perform one of the following functions for each track,
depending on its color:
o
Track Select (green, the default)
o
Record-Arm (red)
o
Solo (yellow)
o
Mute (blue)
The first button ( B1 , under the master fader ) does not have a track-specific function.
To set the function of all buttons, press and hold Shift , and then press the first button
( B1 , under the master fader ) to cycle through the four functions. The display will show
the current function: TRACK (track select), RECORD (record-arm), SOLO , or MUTE . This
will set all buttons to the same function regardless of their current functions.
To set the function of one button only, press and hold Shift , and then press the desired
button to cycle that button only through the four functions. The display will show the
current function: TRACK (track select), RECORD (record-arm), SOLO , or MUTE .
•
Encoders: Turning the encoders will adjust the panning of each track.