54
MIDI Notes
You can assign the buttons to send MIDI note numbers.
The buttons must be in MIDI Mode to do this (see
To assign a MIDI note to a button:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the desired button. The button’s number will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show the
button’s number (
B__
) and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) to enter
147
(if the display does not already show it). This sets
the button to send MIDI note messages.
5.
Press the
Data 1
key. The
display
will show
DATA1
for 1 second and then show the
button’s number (
B__
) and a number for the MIDI note.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired note
number (
001
–
127
).
7.
Repeat Steps 5–6 but using the
Data 2
key. This will determine the Note Off velocity.
8.
Repeat Steps 5–6 but using the
Data 3
key. This will determine the Note On velocity.
9.
Press the
Enter
key. The button is now set to send the assigned note, and you will exit
Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Tip:
You can assign a button to send a Note On message when it is pressed once and send a
Note Off message when it is pressed a second time. To do this, follow the steps above, but
enter
148
(instead of
147
) in Step 4.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
