M-Audio code25, Руководство пользователя

Страница: 97 / 115

97
Using HUI
When your faders, buttons, and/or encoders are in Mackie Control/HUI Mode, their respective
Fader Mode , Button Mode , or Encoder Mode button will be lit green .
Use the Bank Right / Left (

) buttons to move to another bank of tracks.
Important note if you are using Code 25: In your DAW, it may look like you are controlling 8
tracks, but you can control only 4 tracks at a time. When you press one of the Bank
Right / Left (

) buttons, you will control only the next/previous 4 tracks.
When using the HUI protocol, each of the controls will do the following:
•
Faders: Moving the faders will adjust the volume of each track except for the master
fader ( F1 ), which will remain in MIDI Mode.
•
Buttons: Pressing the buttons will perform one of the following functions for each track,
depending on its color:
o
Track Select (green, the default)
o
Record-Arm (red)
o
Solo (yellow)
o
Mute (blue)
The first button ( B1 , under the master fader ) does not have a track-specific function.
To set the function of all buttons, press and hold Shift , and then press the first button
( B1 , under the master fader ) to cycle through the four functions. The display will show
the current function: TRACK (track select), RECORD (record-arm), SOLO , or MUTE . This
will set all buttons to the same function regardless of their current functions.
To set the function of one button only, press and hold Shift , and then press the desired
button to cycle that button only through the four functions. The display will show the
current function: TRACK (track select), RECORD (record-arm), SOLO , or MUTE .
•
Encoders: Turning the encoders will adjust the panning of each track. In Avid
®
Pro
Tools
®
, stereo channels have two panning controls: left and right. Press the Shift button
to switch the encoders between the left channel and right channel.