78
Program Cycle
You can also set a pad to cycle through 3 or 4 program numbers by each time you press it.
To assign a pad to cycle through 3 or 4 program numbers:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the desired pad. The pad’s number will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show the
pad’s number (
P__
) and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter
156
(to increment
the program number) or
155
(to decrement the program number).
5.
Press the
Data 2
key. The
display
will show
DATA2
for 1 second and then show the pad’s
number (
P__
) and the lowest program number it will send.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a value (
000
–
127
).
7.
Press the
Data 3
key. The
display
will show
DATA3
for 1 second and then show the pad’s
number (
P__
) and the highest program number it will send.
8.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a value (
000
–
127
).
9.
Press and hold
Shift
, and then press the
Data 3
/
–
/
+
key. The
display
will show
DATA+1
for 1 second and then show the pad’s number (
P1
–
P16
) an additional program number it
will send.
10.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a program number
between the lowest and highest values (
000
–
127
).
11.
Optional:
To set one more program number the pad will send, repeat Steps 9–10 once
more.
12.
Press the
Enter
key. The pad is now set to cycle through the assigned 3 or 4 program
numbers, and you will exit Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
