93
Latching
By default, the sustain pedal is set to send one value when pressed and one value when
released. This is often called “momentary” behavior. You can change this so that the sustain
pedal sends one value when pressed and a different value when pressed a second time,
alternating between the two values with each press. This is often called “latching” or “toggle”
behavior.
To set the sustain pedal to latching behavior:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the sustain pedal.
SUS
will appear in the
display
.
3.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter
146
(if the display
does not already show it). This sets the sustain pedal to use latching behavior.
4.
Press the
Data 1
key. The
display
will show
DATA1
for 1 second and then show
SUS
and
a number for the MIDI CC.
5.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired MIDI
CC number (
001
–
127
).
6.
Press the
Data 2
key. The
display
will show
DATA2
for 1 second and then show
SUS
and
the value it will send when pressed the first time.
7.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired value
(
001
–
127
).
8.
Press the
Data 3
key. The
display
will show
DATA3
for 1 second and then show
SUS
and
the value it will send when pressed the second time.
9.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired value
(
001
–
127
).
10.
Press the
Enter
key. The sustain pedal is now set to latching, and you will exit Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
To return the sustain pedal to its default “momentary” behavior, assign it to a MIDI note or
MIDI CC as described in the earlier
section.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
