95
Messages
MIDI CCs
You can assign the sustain pedal to send a MIDI CC message when you press it.
To assign a MIDI CC to the volume pedal:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the volume pedal.
VOL
will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show
VOL
and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a MIDI CC number
(
001
–
127
).
5.
Press the
Data 2
key. The
display
will show
DATA2
for 1 second and then show
VOL
and
the value it will send at its minimum position.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a value (
001
–
127
).
7.
Press the
Data 3
key. The
display
will show
DATA3
for 1 second and then show
VOL
and
the value it will send at its maximum position.
8.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter a value (
001
–
127
).
9.
Press the
Enter
key. The volume pedal is now set to send the assigned MIDI CC, and you
will exit Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Tip:
You can reverse the direction (polarity) of the volume pedal so that its lowest position
sends its maximum value and vice versa. To do this, enter the desired maximum value in
Step 5 and the desired minimum value in Step 7.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
