92
MMC
(
MIDI Machine Control
)
Some recording hardware and DAWs can be controlled remotely via MMC (MIDI Machine
Control) messages. MMC is a transport control protocol.
To assign a MMC message to the sustain pedal:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the sustain pedal.
SUS
will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show
SUS
and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) to enter
149
(if the display does not already show it). This sets
the sustain pedal to send MMC messages.
5.
Press the
Chan Assign
key. The
display
will show
DEV ID
for 1 second and then show
SUS
and the current MIDI channel it uses.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter
127
.
7.
Press the
Data 2
key. The
display
will show
DATA2
for 1 second and then show
SUS
and
the number for its MMC message (if any):
001
Stop
008
Record Pause
002
Play
009
Pause
003
Deferred Play
010
Eject
004
Fast-Forward
011
Chase
005
Rewind
012
MMC Reset
006
Record Strobe (Punch In)
007
Record Exit (Punch Out)
8.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the number of the
desired MMC message.
9.
Press the
Enter
key. The sustain pedal is now set to send the assigned MMC message,
and you will exit Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
