Page 25
3.5
Tools Page
3.5.1
Restore Default Routing
This button restores the factory default settings, as covered in
section 3.4.8
.
3.5.2
Save Scene Button
Once you have created a specific routing/level set up that you may want to recall,
here is where you would store it.
Hilo scenes store routing, clocking settings, level controls, sample rate
conversion settings and more into an instantly recall-able “scene”. The
“Save Scene” button on the Tools page is where this occurs. Now you
have the ability to name the scenes.
Once you have a set up that you want to save, press the SAVE SCENE
button. Up to six scenes can be saved.
The new QWERTY keyboard screen will come up and you can name the
scene using up to 13 characters
Input the Scene name using your fingers (or some pointed, non-abrasive
pointer such as pencil eraser, pen end or even a chop stick). To clear the
entire name, tap the Clear button. To backspace and clear one letter at a
time, tap the Back button. Tapping the Cap button will capitalize the
letters but keep the row of numbers. Tapping Shift capitalizes the letters
and changes the numbers to commonly used symbols. Tap the Save
button when finished.
You have now stored your scene name, routing, level, meter, sample rate,
sync source, trim, digital source, audio settings, UI options and optical
mode information.
If you do not want to Save a scene, push the Cancel button at the bottom
of the Pop up.
