Press
Here
T
o Op
er
a
t
e
D
o
o
r
Battery
Cover
Up/D own
LED
Wall
Station
(2) AAA
Batter ies
Lower
Clip
Service
Entrance
Door
Entrapment
Warning Label
Wall Station
Remove the battery cover (right-hand side of
wall station) by disengaging the battery cover’s
lower clip. Install two AAA batteries into the wall
station observing the polarity, (+) and (-), of
both batteries. After about three seconds, the
red LED will begin to blink every three seconds.
top into the wall station then inserting and
securing its bottom.
Apply entrapment warning label in a
convenient location next to the wall station.
Use mechanical fasteners if adhesive will
not adhere.
Deluxe Multi-Function Wireless Wall Station Installation (Continued)
(If Included)
10
Entrapment Warning Label
NOTE: To slow the blink rate or to completely
turn it off, refer to Wall Station operation on
page 30 “Back Lit LED Light”.
16
