Lutz Easyzon D 100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 45

Section 2: Safety
P a g e | 4
2 Safety
The following warnings are intended to help you to
eliminate the dangers that can arise while handling the
device. Risk prevention measures always apply
regardless of any specific action.
Safety instructions warning against risks arising from
specific activities or situations can be found in the
respective sub-chapters.
DANGER!
Mortal danger from electric shock!
Live parts can inflict fatal injuries.
•
Disconnect from the electricity supply before
working on any equipment.
•
Secure all devices to prevent it from being
switched on again.
DANGER!
Risk of explosion due to ClO
2
gas!
The two chemical precursors, hydrochloric acid (HCl)
and sodium chlorite (NaClO
2
) almost instantly form
large quantities of toxic ClO
2
gas, which can also
decompose in an explosive manner.
•
NEVER mix the two chemical precursors,
hydrochloric acid (HCl) and sodium chlorite
(NaClO
2
), except within the
Easyzon D
process.
WARNING!
Risk of contact with toxic ClO
2
solution!
If system leaks occur, toxic ClO
2
solution can escape.
•
Under no circumstance must the dosing pump
maximum permissible pressure be exceeded.
•
Entire installation must remain leak free in
operation.
CAUTION!
Risk of equipment starting automatically!
Remember the
unit a
nd the dosing pump(s) are two
separate pieces of equipment with respect to the
chlorine dioxide treatment/process on site.
•
The
Easyzon D
system operates automatically
when the batch tank is running low.
•
The dosing pump(s) will automatically respond
to the treatment/process conditions on site, e.g.
water meter signal input and/or analyser signal
input.
CAUTION!
Damage to the system due to incorrect
maintenance!
Irreversible damage to equipment and treatment
process.
•
Adhere to planned maintenance frequency to
system equipment.
2.1 Hazards Due to Non-compliance
Failure to follow the safety instructions leads to:
•
Failure of important functions of the device and
of the corresponding system.
•
Failure of required maintenance and repair
methods.
•
Danger to personnel.
•
Danger to the environment .
2.2 Working in a Safety-conscious Manner
Safety rules and regulations not specified in this
manual, which must be adhered to:
•
Accident prevention regulations
•
Safety and operating provisions
•
Environmental protection provisions
•
Applicable standards and legislation