Intended use
9
© Lutz-Jesco GmbH 2020
Subject to technical changes.
200922
BA-62010-01-V01
Chlorine Dioxide System
EASYZON Dd
Operating Instructions
3 Intended use
3.1 Notes on product warranty
Any non-designated use of the product can compromise its function or
intended protection. This leads to invalidation of any warranty claims!
Please note that liability is on the side of the user in the following cases:
n
The system is operated in a manner which is not consistent with these
operating instructions, particularly safety instructions, handling in-
structions and the section "Intended Use".
n
If people operate the product who are not adequately qualified to carry
out their respective activities.
n
No original spare parts or accessories of Lutz-Jesco are used.
n
Unauthorised alterations are made to the system.
n
The user uses different dosing media than those indicated in the or-
der.
n
The user does not use dosing media under the conditions agreed with
the manufacturer such as modified concentration, density, tempera-
ture, contamination, etc.
n
Maintenance and inspection intervals are not adhered to as required
or not adhered to at all.
n
The system is commissioned before it has been completely and prop-
erly installed.
n
Safety equipment has been bridged, removed or made inoperative in
any other way.
3.2 Intended purpose
The chlorine dioxide system is intended for the following purpose: Pro-
duction of a chlorine dioxide solution (ClO
2
) from sodium chlorite (NaClO
2
),
hydrochloric acid (HCl).
3.3 Principles
n
The system may only use 7 % sodium chlorite (NaClO
2
) in accordance
with EN 938.
n
The system may only use 9 % hydrochloric acid (HCI) in accordance
with EN 939.
n
Comply with the information regarding the operating and environmen-
tal conditions (see section "Technical Data" on page 15).
n
The manufacturer's/chemical supplier's EEC safety data sheets for
the chemicals included in the scope of delivery of the system are to be
complied with and must be held accessible to every user of the sys-
tem.
