Safety
7
© Lutz-Jesco GmbH 2020
Subject to technical changes.
200922
BA-62010-01-V01
Chlorine Dioxide System
EASYZON Dd
Operating Instructions
2.2 Hazards due to non-compliance with the safety
instructions
Failure to follow the safety instructions may endanger not only persons,
but also the environment and the device.
The specific consequences can be:
n
Failure of major system functions,
n
Failure of required maintenance and repair methods,
n
Danger for individuals through dangerous dosing media,
n
Danger to the environment caused by substances leaking from the
system.
2.3 Working in a safety-conscious manner
Besides the safety instructions specified in this operating manual, further
safety rules apply and must be followed:
n
Accident prevention regulations
n
Safety and operating provisions
n
Safety provisions for handling dangerous substances (mostly the
safety data sheets to dosing media)
n
Environmental protection provisions
n
Applicable standards, specifications and legislation
i
The information from standards and technical regulations
contained in these operating instructions are to be understood
as supplementary information. In no way do they absolve the
reader of the obligation to obtain the relevant information
themselves. The manufacturer does not accept any responsi-
bility for the up-to-date nature of the recommendations and
instructions from standards and technical regulations pub-
lished in these operating instructions.
2.4 Personal protective equipment
Based on the degree of risk posed by the dosing medium and the type of
work you are carrying out, you must use corresponding protective equip-
ment. Read the Accident Prevention Regulations and the Safety Data
Sheets to the dosing media find out what protective equipment you need.
You will require the minimum of the following personal protective equip-
ment:
Personal protective equipment required
Gas mask with filter type "B"
Safety goggles with safety visor
Tab. 3: Personal protective equipment required
Personal protective equipment required
Taiwek overalls
Safety shoes
Anti-acid gloves
Tab. 3: Personal protective equipment required
Wear the following personal protective equipment when performing the
following tasks:
n
Commissioning
n
Working on the dosing pump while running
n
Shut-down
n
Maintenance work
n
Disposal
2.5 Personnel qualification
Any personnel who work on the system must be in possession of the ap-
propriate special knowledge and skills.
Anybody who works on the system must meet the following conditions:
n
Attendance at all the training courses offered by the owner
n
Personal suitability for the respective activity
n
Sufficient qualification for the respective activity
n
Training in handling of the system
n
Knowledge of safety equipment and the way this equipment functions,
n
Knowledge of this operating manual, particularly of safety instructions
and sections relevant for the activity
n
Knowledge of fundamental regulations regarding health and safety
and accident prevention
All persons must generally have the following minimum qualification:
n
Training as specialists to carry out work on the device unsupervised,
n
Sufficient training that they can work on the device under the supervi-
sion and guidance of a trained specialist.
These operating instructions differentiate between these user groups:
2.5.1 Specialist staff
Thanks to their professional training, knowledge, experience and knowl-
edge of the relevant specifications, specialist staff are able to perform the
job allocated to them and recognise and/or eliminate any possible dan-
gers by themselves.