Lutron Electronics EcoSystem, Техническое руководство

Страница: 16 / 32

Functionality
•
Lighting Control
- Personal control of the light level of individual
fixtures or groups of fixtures
•
Grouping
- Assign individual or groups of fixtures to
wallstations, daylight sensors and occupancy
sensors so that one sensor can control
multiple fixtures/ballasts
•
Device Setup
- Daylight sensor: Set the electric light level that
responds to the presence of daylight
- Occupancy sensor: Set the time-out length,
light level when room is occupied, and light
level when room is not occupied
- 4-Button Wallstations: Set light levels for each
individual or group of fixtures to create scenes
for each button of the wallstation.
•
Ballasts
- Addressing: This begins the automatic
addressing of individual or multiple ballasts
- Configuration: Set maximum level, fade time,
or emergency level for each ballast or all ballasts
on the system
- Replacement: Simply enter the serial number
of the old ballast and all programming is
transferred to the new ballast
EcoSystem Programmer
C-PDA-CLR
•
Handles programming changes for all sensors and ballast
•
Transmits to any IR receiver, daylight sensor, or
EcoSystem wallstation
•
Simple user interface allows programming without training
or guidebook
•
User name/Password requirement ensures security of system
•
Programmer will not operate or store non-EcoSystem programs
or information
Ballasts
BMF
Daylight Sensors
Occupancy Sensors
IR Receiver and Remote
Bus Supply
4
1
2
3
4
Dimensions
W: 3.00" (76mm)
H: 4.75" (121mm)
D: 0.50" (13mm)
2
1
W
allstations
3
Lutron
|
15
Technical Support: 1.800.523.9466 … 24 hours/7 days (US/CAN)
To Order: 1.888.LUTRON1 … 8 am – 8 pm/M-F ET (US/CAN)
Pr
ogrammer
4
EcoSystem
™
|
programmer
Step Support Components
Programming EcoSystem
Any EcoSystem can be programmed using the EcoSystem
programmer. This device is designed with a graphic display
to make programming quick and simple.