Lutron Electronics EcoSystem, Техническое руководство

Страница: 14 / 32

Pendant Fixture Ceiling Tile or Fixture
Pendant Fixture Ceiling Tile or Fixture
Wiring the Infrared Receiver/Wallstation
•
Wire color designations of the IR sensor:
Red = 20VDC
Black = Common
White = IR Signal
•
Make sure that the supply breaker
to the digital ballast is OFF when wiring
•
Connect the three conductors to the
three digital ballast terminals as shown
Note: The digital BMF accepts only
one IR input. Use of the infrared
receiver precludes the use
of the IR output in the daylight
sensor for programming.
3
Infrared
Receiver
Ballast Terminals
or
Wallstation
Radius = 6' (1.83m)
3'
(0.91m)
7'
(2.13m)
Red
Black
White
White
Orange
Black
E1
E2
+20V
+20V
+20V
Common
Common
Common
IR/Wallstation
Occ
Daylight
Mounting the Infrared Receiver
Determine the proper location of the infrared
receiver using the adjacent diagrams.
•
The infrared receiver receives IR signals from
up to 8' (2.44m) away when mounted on a
10' (3.05m) ceiling
•
The cone of reception is centered upon the
infrared receiver per the diagram to the right
•
The cone of reception will be diminished
when receiver is mounted less than 10' (3.05m)
from the floor
•
Ensure that the receiver is placed with a clear line
of sight between the receiver and the desired
control locations
Ballasts
BMF
Daylight Sensors
Occupancy Sensors
IR Receiver and Remote
Bus Supply
1
2
3
4
2
1
W
allstations
3
Pr
ogrammer
4
Lutron
|
13
Technical Support: 1.800.523.9466 … 24 hours/7 days (US/CAN)
To Order: 1.888.LUTRON1 … 8 am – 8 pm/M-F ET (US/CAN)
22 AWG solid 105˚C only
Step Control Selection
EcoSystem
™
|
IR receiver and remote