1. INSTALLATION
1.1 Mounting the device
RACK MOUNT
In case you want to mount your LumiSplit 2.10 in a standard 19-
inch rack, you need 4 rack screws (A) to mount the device.
A
WIRE*
CONNECTION
Green/Yellow
AC Ground
Blue
AC Neutral
Brown
AC Line
* International (Harmonised) Standard
1.2 Power up the device
Power-up the device with a power cable with Neutrik powerCON
TRUE1 connection (J) (please contact your local dealer if you don’t
have a suitable power cable on hand). The device will automatically
switch on. To shut it down after use, just un-plug the power cable
again. After connecting the power cable correctly, by default the
power LED indicator on the front panel will light up in green.
The LumiSplit requires standard AC power distribution from 100-
240VAC, 50/60Hz.
The mating Neutrik® powerCON® TRUE1 connector is supplied;
however, you will need to purchase or construct a cable appropriate
for your application.
When installing a new connector please refer to the following wire
colour code reference:
J
4
