3.3 Lock / Unlock the Front Panel
To lock the device, right click on one of the responders and select
Lock
state
> Front Panel Locked
. To unlock the device, repeat the same
operation, and select
Lock state > unlocked
.
When you select “Front panel locked” a popup window appears to en-
ter a 4-digit pin code. This window shows four dots to indicate the pin
code needs to be 4 digits.
3.4 Dark Mode
The LumiSplit offers you to lower down the brightness of the LEDs.
Right click on one of the responders and select display level. Here you
can set the brightness either to low or full.
There is no intermediate value available for the brightness of the LEDs.
3.5 Mode Selection
You can remotely select one of the modes the splitter offers. Right click
on one of the responders and select the desired mode. Regeneration
mode is available for both responders. You need to select the right re-
sponder (A or B) to assign the regeneration mode to it.
From here, you can reload presets stored on outlet 9 and 10 as well.
More details about each available mode can be found in paragraph
2.4 of this manual.
10
3 | THE NEW RDM EXPERIENCE /
3.3 LOCK / UNLOCK THE FRONT PANEL / 3.4 DARK MODE / 3.5 MODE SELECTION