background image

2. INSTALLATION

2.1 Mounting the device

 RACK MOUNT

In case you want to mount your GigaCore 26i and GigaCore 26i 

with PoE in a standard 19-inch rack, you need 4 rack screws to 

mount the device.

2.2 Power up the device

Power-up the device with a power cable with IEC connection (J) 

(please contact your local dealer if you don’t have a suitable power 

cable on hand). The device will automatically switch on. To shut it 

down after use, just un-plug the power cable again.

After connecting the power cable correctly, the power LED 

indicator on the front panel will light up green.

The GigaCore 26i and GigaCore 26i with PoE requires standard AC 

power distribution from 100-240VAC, 50/60Hz. Current required 

depends on the model.

Please use an IEC plug compliant cable to power the device. 

Luminex recommends the use of a power cable fi tted with a 

locking mechanism to ensure a reliable connection to the device.

When installing a new connector please refer to the following wire 

colour code reference:

WIRE*

CONNECTION

Green/Yellow

AC Ground

Blue

AC Neutral

Brown

AC Line

* International (Harmonised) Standard

J

6

Содержание GigaCore 26i with PoE































Отзывы: