2.8 Connecting the GigaCore
Redundant Power Supply Unit 400
The GigaCore 26i and GigaCore 26i with PoE provide a connector to an
optional Luminex Redundant Power Supply Unit (RPSU400), providing
redundancy on power level for both the mains and the PoE power.
Only use the RPSU400 to connect to the GigaCore 26i or GigaCore 26i
with PoE. The part number for the RPSU400 is LU 01 00061.
THIS UNIT HAS MORE THEN ONE POWER SUPPLY. DISCON-
NECT ALL POWER SUPPLIES BEFORE SERVICING TO AVOID ELEC-
TRIC SHOCK
3. GIGACORE FEATURES EXPLAINED
The GigaCore range of switches off ers many unique features
which greatly simplify your everyday job.
These features will be explained on the following paragraphs.
3.1 RlinkX:
RLinkX, which stands for
R
edundant
Link
by Lumine
X
, is an automat-
ed system to easily create redundant paths between your GigaCore
switches. Switches automatically create active and redundant paths,
providing an eff ortless method to create safe networks.
If one of the active paths fails, the switches will enable a redundant
path in a seamless manner. The recovery time is between 20 and 40ms.
By default, all GigaCore ports have RLinkX enabled, which means you
can interconnect any GigaCore switch between each other. All redun-
dant paths will be created automatically by the switches, no need for
confi guration.
Active path
Backup path
10
2 | INSTALLATION /
2.8 CONNECTING THE GIGACORE REDUNDANT POWER SUPPLY UNIT
3 | GIGACORE FEATURES EXPLAINED /
3.1 RLINKX
