background image

7. APPENDIX

DISCLAIMER

Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document 
above without prior notice. Specifi  cations are subject to change without notice.

Copyright © 2002-2021.

All rights reserved.

No part of this documentation may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior 
written permission of Luminex. The information in this documentation is supplied without warranty of any kind, either directly or indirectly, and is subject to change without prior 
written notice. Luminex, its employees or appointed representatives will not be held responsible for any damages to software, hardware, or data, howsoever arising as a direct or 
indirect result of the product(s) mentioned herein.

7.1 TECHNICAL DATA

Mains Voltage:

100 – 240VAC

Main Frequency:

50/60Hz

Power consumption:

Max 50W (non-PoE)

Max 400W (PoE)

External fuse:

No

Dimensions (W x D x H):

482 x 270.3 x 44 mm 19” x 10.64” x 1.73”)

Weight:

4.0 kg

Operating temperature:

0 to +50°C (non-PoE)

0 to +40°C (PoE)

Storage temperature:

-10 to +70°C

Humidity (non-condensing):

5 to 95%

Certifi cates / Approvals:

cSGSus Mark, CE, CB certifi cate

Standards:

IEC 60950-1, EN 60950-1, UL 60950-1, CAN/CSA-C22.2 No. 60950-1, FCC Part 15 CFR 47 class 

A, CAN/ICES-003, EN 55022, EN 55024, RoHS, Reach

Ethernet compliance:

IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.1p 

CoS (Class of Service), Diff Serv (DSCP), PoE (802.3af ) (optional), PoE+ (optional), IEEE 1588 

PTPv2

Sound protocol compliance:

Yes (low jitter)

28

Содержание GigaCore 26i with PoE































Отзывы: