15
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: HF1161
6. Final Assembly
#8 EXTERNAL
TOOTH
LOCKWASHER (2)
CEILING
COVER
1-1/4"
THREADED
STUD (2)
#8-32 KNURLED
KNOB (2)
Figure 25
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Ceiling Cover
Holes (Figure 25).
Secure the Ceiling Cover in place by sliding a
Lockwasher over each of the Threaded Studs and
installing the two Knurled Knobs (supplied) (Figure 25).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod.
THREADED
STUDS (2)
HANGER
BRACKET
Figure 24
6.1
Screw the Two #8-32 x .75” Threaded Studs into the
Threaded Holes on the bottom of the Hanger Bracket
with your fingers (Figure 24).
