Luda Elektronik 302K05, Руководство пользователя

Страница: 51 / 142

- 51 -
DE
FI
FR
SV
EN
Troubleshooting the receiving A300-antenna (10dBi) and the videoLink
So far we know that the LCD-monitor, the camera and the transmitting A300-antenna (10dBi) are
functioning, therefore we can connect the receiving A300-antenna (10dBi) with the videoLink.
No picture (black & white interference)
Possible error
• The videoLink is not supplied with power
• Wrong channel is chosen on the LCD-monitor.
• At least one of the two joints on the 5 m
antenna cable is not correctly connected.
• The cable might be pinched.
• No antenna on the transmitting part of the
videoLink.
Action
• Connect the 5V power adapter to a
functioning 220V wall socket, LEDs will light
on the videoLink.
• Choose the same channel as the videoLink
transmits on (usually 1), i.e. not the
transmitting channel of the camera.
• Inspect the joint on the videoLink and the
joint of the A300-antenna, screw and tighten
using moderate force.
• Inspect the cable. If it has been bent more
than 90°, the wire inside the cable might
have been broken. Order a new cable from
www.cowcam-europe.com.
• Make sure that you have connected
the black transmitting antenna (2dBi) to
the transmitting part of the videoLink in
accordance to the illustration in chapter 11.
ok ? ok
? ok