7-30
MAX Administration Guide
Administering TCP/IP
Managing the Open Shortest Path First (OSPF) protocol
For example:
ascend% sh ospf intf 194.194.194.2
Interface address: 194.194.194.2
Attached area: 0.0.0.0
Physical interface: phani (wan1)
Interface mask: 255.255.255.255
Interface type: P-P
State: (0x8) P-P
Designated Router: 0.0.0.0
Backup DR: 0.0.0.0
Remote Address: 194.194.194.3
DR Priority:
5
Hello interval:
30
Rxmt interval:
5
Dead interval:
120
TX delay:
1
Poll interval:
0
Max pkt size:
1500
TOS 0 cost:
10
# Neighbors:
1
# Adjacencies:
1
# Full adjs.:
1
# Mcast floods: 1856
# Mcast acks:
1855
The output includes the following fields:
Field
Description
Interface
Address
The IP address specified for the MAX’s Ethernet interface.
Attached Area
Area in which the interface resides.
Physical
interface
Name of the interface or the Connection profile for WAN links.
Interface type
Point-to-Point (P-P)
or
Broadcast (Bcast)
. WAN
links are P-P links.
State
State of the link according to RFC 1583. There are many possible
states, and not all states apply to all interfaces.
Designated
Router
IP address of the designated router for the interface.
Backup DR
IP address of the backup designated router for the interface.
Remote Address
IP address of the remote end of a Point-to-Point (WAN) link.
DR Priority
Priority of the designated router.
Hello interval
Interval in seconds that the MAX sends Hello packets as defined in
RFC 1583.
Rxmt interval
Retransmission interval as described in RFC 1583.
Dead interval
Number of seconds that the MAX waits for a router update before
removing the router’s entry from its table.
TX delay
Interface transmission delay.
Poll interval
Poll interval of non-broadcast multi-access networks.
Max pkt size
Maximum packet size that the MAX can send to the interface.
TOS 0 Count
Type of Service normal (0) cost.
# neighbors
Number of neighbors.