Lucent Technologies Stinger FS, Руководство по началу работы

Страница: 26 / 128

1-8 Stinger® FS/Stinger FS+ Getting Started Guide
Preparing for the Installation
Verifying the hardware configuration
with a nominal supply voltage of -60Vdc. Other modules should not be used in
-60Vdc environments.
Verifying the standard control module model
The following table details the Stinger FS and Stinger FS+ standard control modules:
The Stinger FS and Stinger FS+ units support three different revision 2 standard
control modules, and a revision 2.1 standard control module. The original revision 1
standard control module is not supported with TAOS release 9.8 and later. This
original control module is only supported with earlier releases of TAOS, prior to
release 9.8.
Table 1-1. Stinger modules supporting -60-volt operation
Module Product code Part number revisions
supporting -60Vdc
Stinger FS+ chassis STGR-FSP 0700-0901-001 Rev 11 (and later)
Control module
(standard) STGR-CM-A2 0800-0912-001 Rev 18 (and later)
IP 2000 IP control
module STGR-CM-IP2000F 0800-0912-002 Rev 28 (and later)
IP 2100 IP control
module STGR-CM-IP2100F 0800-0913-001 (all revisions)
72-port ADSL LIM
(Annex A)
STGR-LIM-AD-72 0800-0993-072 Rev 19 (and later)
72-port LPM STGR-LPM2-72 0800-0998-072 Rev F (and later)
48-port ADSL LIM
(Annex B) STGR-LIM-AB-48-2 0800-0930-068 Rev 001 (and
later)
72-port ADSL(2+) LIM
(Annex A)
STGR-LIM-A2P-72 0800-0951-001 (all revisions)
72-port ADSL(2+) LIM
(Annex A) with
integrated line
protection STGR-LIPM-A2P-72 0800-0951-002 (all revisions)
72-port SHDSL LIM STGR-LIM-SL-72 0800-0986-072 Rev 24 (and later)
Fast Ethernet trunk
module STGR-TM-FE-2 0800-0907-001 (all revisions)
OC3 trunk module:
Single port
Two ports
STGR-TM-OC3-1
STGR-TM-OC3-2
0800-0920-001 Rev E (and later)
0800-0920-002 Rev E (and later)