LTH Electronics HPT63, Руководство по эксплуатации

Страница: 53 / 68

16 Appendix A – Factory Default Setups
45
16 Appendix A – Factory Default Setups
Parameters pH Redox
Units pH mV
Electrode Type Glass N/A
Temperature Units °
C
°
C
Temperature Compensation Automatic N/A
Fixed Temperature Input
+25.0
°
C +25.0
°
C
Set Points
SP1 Source Sensor Sensor
SP1 Trigger Low Low
SP1 Level ( Band High ) 7.00pH 200mV
SP1 Band Low 4.00pH 100mV
SP1 Mode On/Off On/Off
SP1 Dose Alarm No No
SP1 Alarm Time (mm:ss) 05:00 05:00
SP1 Delay ( mm:ss ) 00:00 00:00
SP1 Hysteresis ( % of SP Level ) 1.0% 1.0%
SP1 Cycle Time ( mm:ss ) 00:30 00:30
SP1 Proportional Band
( % of range ) 20.0% 20.0%
SP2 Source Sensor Sensor
SP2 Trigger High High
SP2 Level ( Band High ) 9.00pH 300mV
SP2 Band Low 4.00pH 100.0mV
SP2 Mode On/Off On/Off
SP2 Dose Alarm No No
SP2 Alarm Time (mm:ss) 05:00 05:00
SP2 Delay ( mm:ss ) 00:00 00:00
SP2 Hysteresis ( % of SP Level ) 1.0% 1.0%
SP2 Cycle Time ( mm:ss ) 00:30 00:30
SP2 Proportional Band (% of
range) 20.0% 20.0%