4 User Interface
15
4.3 Unit
Configuration
The unit can be configured by navigating around the menu system and setting up the
various unit facilities.
The general principle of setting a parameter is as follows:
1. Use
the ,
, and
keys to navigate to the parameter to be changed.
2. Press
the key to select the parameter for editing. The current parameter
value will start to flash, indicating that it can be changed.
3. Use
the and
keys to cycle through the available values of the parameter
to the required value.
4. Press
the key to confirm your selection of the required value. The
parameter value will stop flashing, indicating that it has been set.
5. Use
the ,
, and
keys to navigate to the next parameter to be changed.
This method can be used for:
•
Turning a facility on or off, e.g.
Temperature Compensation
in the
Parameters
menu. The
and
keys toggle the facility on and off.
•
Selecting between several options, e.g.
Unit
types in the
Parameters
menu.
•
Setting a numeric value such as an access code or trigger level. See
Section
4.4 Number entry
.
For functions such as Resets and Restoring Setups, press the
key to initiate the
function, the system will then ask for confirmation. Press
to confirm the function:
or
to cancel.
Содержание HPT63
