LSIS XBL-EIPT, Руководство пользователя, Страница: 78 / 123

Chapter 6 EIP Service
6-21
3)
Parameter download and Link enable
Refer to 3) Parameter download and Link enable of 6.4.1 Periodic Client Communication Service.
Notice
When a user sets up the module operating via periodic server, the index of EIP block is granted the following
meanings.
(In case of being set by other company’s client)
1. Input Assembly Instance’s start index is 100
2. Output Assembly Instance’s start index is 150
3. For example, in case index 0 is set as periodic server, Input Assembly Instance should be 100 and Output
Assembly Instance should be 150.
4. O2T Input Only Heartbeat Instance ID is 198.
5. O2T Listen Only Heartbeat Instance ID is 199.
6. Configuration Assembly Instance ID is 197.
Order
Set - up
Procedure
How to Set up
2
Block Set-up
▶
Example of Block Set-up
(a) For XBL-EIPT V1.x
(b) For XBL-EIPT V2.0 or later
1) Channel : Select and use the one among the channels where periodic servers have been set up
2) Operating Mode: The operation mode of the channel set up according to the channel set-up is displayed
3) Date Type
i) For XBL-EIPT V1.x:
Fixed to 2 bytes .
ii) For XBL-EIPT V2.0 or later: If you select the local tag, the data type of the selected tag will be displayed.
4) Local Tag: This tag is the device area of the module operating via server.
5) Size
i) For XBL-EIPT V1.x: Input the data size of the module operating via server.
ii) For XBL-EIPT V2.0 or later: If you select the local tag, the size of the selected tag will be displayed.