LSIS XBL-EIPT, Руководство пользователя, Страница: 35 / 123

Chapter 4 System Configuration
4-2
4.2 Configuration of an unusable System
4.2.1 System Configuration using a Switch
It is impossible for EtherNet/IP I/F module to normally operate as data burst happens when each module is connected
to each switch of 2 communication ports.
4.2.2 Configuration of a Ring System (Configuration of a XBL-EIPT Ring)
EtherNet/IP I/F does not support a ring system. When you configure a ring form, it is necessary to set up the IP
address switch of the module – front view at ’99.’ Then, it is configured into a ring system in external aspect, but the
service on an actual ring system is not supported. In case IP address switch is not set up at NO. ‘99’ after configured
into a ring, data burst happens and the module does not normally execute operations.