LSI-Robway RCI-1502 HRT, Инструкция по эксплуатации

Страница: 39 / 109

RCI-1502 HRT Tele Boom Manual
8. In the example above, the default item
An1
has
been selected.
9. Press EN TER ke y while on th e selected item
(e.g. An1) to activate the Edit Codes. There are
four (4) Edit Codes as follows:
Edit
Codes Description
Lo_r Raw Counts of Calibrated Data (Low
End)
Lo_c Calibrated Data (Low End)
Hi_r Raw Counts of Calibrated Data (High
End)
Hi_c Calibrated Data (High End)
10. Th e f irst E dit C ode is
Lo_r
which refers to the
raw counts or raw data of the calibrated low
angle
( e.g., 12 8 cou nts as sh own in t his
example).
11. Manually re cord/copy (wi th pen & paper) the
Lo_r
value.
12. Use the Up/Down Arrow keys to go through and
copy the rest of the edit codes (
Lo_c
,
Hi_r
, and
Hi_c
).
13. Press C ANCEL key to r eturn to the item
An1
screen.
14. Select th e n ext it em,
ld1d
, an d r epeat above
procedures 6 to 13. Select and repeat the same
on
ld2d
if Aux Winch is used (i.e. if crane is
Twin Winch).