LS tractor MT5 Series Скачать руководство пользователя страница 35

Страница: 35 / 192

1 - 24

11. Location : On the right-hand pillar for Cabin

model. (optional)

- JOYSTICK LEVER USAGE.

- TO AVOID PERSONAL INJURY; Wrong

operation causes serious injury easily.

Push the lever(1) into the lock position while

not using.

- Failure to comply could result in death or

serious injury.

- Part number : 40264867

12. Location : On the steel cover under the

instrument console. (optional)

- CAUTION.

- To prevent unnecessary wear, never ride the

clutch pedal for resting a foot.

- Part number : 40222778

10. Location : On the right-hand side cover

- TO PREVENT DEATH OR SERIOUS INJURY

•

During the DPF regeneration process, the

exhaust stack and fixed hood area becomes

extremely hot.

• Park the tractor away from highly flammable

material and person.

- Part No. : 40342880

13. Location : On the left-hand side cover

- CAUTION.

- Use of any engine oil other than(CJ-4) may

clog the DPF earlier than expected. Use only

API CJ-4 engine oil.

- Part number : 40342881

Содержание MT5 Series

































































































































































































Результаты поиска

Содержание MT5 Series

Отзывы:

LS tractor MT5 Series, Руководство оператора, Страница: 35 / 192

Результаты поиска

Содержание MT5 Series

Отзывы: