4 - 7
(5) Driving tractor on the road
When facing downhill, DO NOT place the gear lever in Neutral position.
When driving the tractor on a unpaved road by attaching a implement to 3-point linkage, place the
gear lever to low speed and DO NOT lift the implement up to the highest position. When driving in
the highest position, it may cause the vibration of implement and the failure of hydraulic system.
(In this case, place the position control lever on ¾ rising position of full stroke for safety.)
▶
Connect the left/right brake pedal with brake pedal latch before driving.
▶
Avoid a sudden start, sudden brake and sudden turning.
▶
DO NOT allow people on the tractor or other implements.
▶
DO NOT place the baggage on the tractor or implement.
▶
Place PTO gear lever in Neutral position and put the PTO switch in “OFF” position.
▶
DO NOT use the differential lock pedal and front wheel drive (2WD use only).
▶
When traveling with implement on rear 3-point linkage, tighten the stabilizer to
avoid lateral movement.
▶
When traveling with implements installed, turn slowly by wide turning radius.
▶
While traveling, DO NOT ride your foot on the clutch pedal (if fitted) or brake pedal.
▶
While traveling, DO NOT operate any implement such as tiller, loader etc.
▶
When starting or traveling on a slope, select a suitable speed.
Specially for power
shuttle model, the reliability of the power shuttle clutch may be reduced
rapidly due to the long engagement time.
Caution
DO NOT USE DIFF-LOCK