L-INX User Manual
70
LOYTEC
Version 4.0
LOYTEC electronics GmbH
Figure 56: Data point details page.
Clicking on the
Set
button writes the new value to the device‘s data server. When setting a
value, the Web page displays the status of the action:
Successfully set value
: The new value has been successfully set in the data point and
the update has been sent on the network, if it is a network data point.
Could not send value update
: The new value has been set but it has not been sent out
on the network. The reason can be that the peer node is currently offline or there is a
configuration error. The data point status reflects this error.
Could not set value (error code
): The new value has not been set because of an
internal error. Please contact LOYTEC with the error code.
4.2.17 Trend
The Web interface provides a configuration page to re-configure trend logs at run-time. The
changes made to the trend logs take effect immediately without the needs for a reboot of the
device. Allocating new trend logs can only be done in the configuration software (see
Section 6.14.1). The trend log main page displays all available trend logs. Click on the trend
log to be edited. This opens the trend log configuration page. An example is shown in
Figure 57.