Lowrance LMS-520C, Инструкция по установке и эксплуатации

Страница: 45 / 252

35
To use the module in an automobile, you may achieve good results by
simply placing the external antenna on the top of the dash, at the base of
the windshield. A piece of the rubber non-skid shelf liner material avail-
able in recreational vehicle supply stores will help hold the antenna in
place. This may not work well if you have a cab-over design pickup truck
camper or motor home. If dashboard reception is poor, simply relocate
the antenna module elsewhere on the vehicle for a clearer view of the
sky.
Connecting to a NMEA 2000 Network
A network bus is an installed and operational network cable (backbone)
running the length of your boat, already connected to a power supply and
properly terminated. Such a bus provides network connection nodes at
various locations around your boat. The NMEA 2000 network is similar to
the telephone wiring in a house. If you pick up a phone in your living room,
you can hear someone talking into the phone in the bedroom.
Lowrance and LEI provide all the cables you will need to create a NMEA
2000 network. Lowrance provides T connectors and extension cables so
you can add devices along the backbone wherever you want. Once you
have a working network, every sensor added will come with its own T
connector for easy expansion.
The simplest NMEA 2000 network is a GPS or sonar/GPS display unit
with the LGC-3000, one double-T connector, two 120 ohm terminators
and any extension cables needed to connect them. The diagram below
details how to set up that type of network.