Lowara ESH ATEX, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 126

20
en - Original instructions
under the sole responsibility of the
manufacturer.
4. Object of the declaration: electric pump,
composed of
- pump
II 2G c IIC T4 Tamb -10 +55 °C
- electric motor, in one of following
versions
II 2G Ex d IIC T4 Gb IP55 Tamb -10
+55°C
II 2G Ex d IIC T4 Gb IP65 Tamb -10
+55°C
II 2G Ex d IIC T4 Gb IP55 Tamb 0
+40°C
II 2G Ex d IIC T4 Gb IP65 Tamb 0
+40°C
II 2G Ex d IIB T4 Gb IP55 Tamb -10
+55°C
II 2G Ex d IIB T4 Gb IP65 Tamb -10
+55°C
II 2G Ex d IIB T4 Gb IP55 Tamb 0
+40°C
II 2G Ex d IIB T4 Gb IP65 Tamb 0
+40°C
II 2G Ex de IIC T4 Gb IP55 Tamb -10
+55°C
II 2G Ex de IIC T4 Gb IP65 Tamb -10
+55°C
II 2G Ex de IIC T4 Gb IP55 Tamb 0
+40°C
II 2G Ex de IIC T4 Gb IP65 Tamb 0
+40°C
II 2G Ex de IIB T4 Gb IP55 Tamb -10
+55°C
II 2G Ex de IIB T4 Gb IP65 Tamb -10
+55°C
II 2G Ex de IIB T4 Gb IP55 Tamb 0
+40°C
II 2G Ex de IIB T4 Gb IP65 Tamb 0
+40°C
II 2G Ex nA IIC T3 Gc IP55 Tamb 0
+40°C
II 2G Ex nA IIC T3 Gc IP65 Tamb 0
+40°C
II 2G Ex nA IIB T3 Gc IP55 Tamb 0
+40°C
II 2G Ex nA IIB T3 Gc IP65 Tamb 0
+40°C
5. The object of the declaration described
above is in conformity with the relevant
Union harmonisation legislation: Directive
2014/34/EU of 26 February 2014
(equipment intended for use in potentially
explosive atmospheres)
6. References to the relevant harmonised
standards used or references to the other
technical specifications, in relation to
which conformity is declared:
–
pump
EN 1127-1:2011, EN 15198:2007,
EN 13463-1:2009,
EN 13463-5:2011
–
electric motor
refer to electric motor
manufacturer’s declaration of
conformity included in the supply.
7. The notified body
–
pump
SGS Baseefa Limited (NB 1180)
performed the EU-type
examination and issued the
certificate: Baseefa16ATEX0067X
–
electric motor
refer to electric motor
manufacturer’s declaration of
conformity included in the supply.
8. Additional information: the following
specific conditions of use apply.
–
The equipment must be suitably
earthed prior to operation.
– It is the user’s responsibility to
ensure the equipment does not run
dry. Any control system used to
achieve this must comply with the
relevant requirements of EN 13463-
6.
–
For T4 operation the maximum
temperature of the process fluid
must not 90°C.
Signed for and on behalf of:
Xylem Service Italia S.r.l.
Montecchio Maggiore, 11.03.2016
Amedeo Valente
(Director of Engineering and
R&D)
rev.01
Lowara is a trademark of Xylem Inc. or one of
its subsidiaries.
1.6.4 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in
Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the
product:
Pump (see label on first page)
fulfills the relevant provisions of the following
European directives:

Machinery 2006/42/EC (ANNEX II -
natural or legal person authorised to
compile the technical file: Xylem Service
Italia S.r.l.)

Eco-design 2009/125/EC, Regulation
(EU) No 547/2012 (Water pump) if MEI
marked
and the following technical standards

EN ISO 12100:2010,
EN 809:1998+A1:2009