Louet Megado 110, Инструкция по эксплуатации

Страница: 29 / 43

27
You can evaluate whether the adjustment has been done accurately by turning the black
plastic knob on front of the dobby mechanism.
In both positions of the spring, you must be able to turn the knob both ways with equal ease.
If this is not the case, recheck the adjustments.
9. Installing the program bars
Disconnect the chain of program bars by pushing the grey connecting pegs on each side
towards the inside and then pull them out of the chain.
Guide the program bars over the two
wooden pulleys, so that you can see
the numbers while you deposit the first
bar into the groove at the top of the
wooden roller.
Turn the roller with the knob two
positions, take the first bar from
underneath the roller, and guide the
program bars towards you, while
turning the roller further. The chain of
program bars must pass over the round
wooden supports (see picture).