12
8. Installing the cloth beam
Open hardware Bag 3, which is in Box C:
•
10 beam cords (if your Megado is a 70 or 110,
you only need 6 or 8 of them)
•
1 ratchet wheel
•
4 screws 4 x 30 mm
•
1 ratchet
•
1 lag screw m6 x 30 mm
•
2 screws 4 x 13 mm
•
1 buffer and screw 4 x 21 mm
•
1 spring
•
1 screw eye
•
1 carriage bolt m8 x 75 mm with
large washer, 33 mm bushing,
small washer, and cap nut
•
1 threaded hook m6 x 60 mm with
m6 barrel nut
•
1 brake cable
•
1 carriage bolt m8 x 50 mm with
large washer, 5 mm bushing, small
washer, and cap nut
•
1 hook with a Texsolv cord
Screw the ratchet onto the inside of the
right side rail using the lag screw.
Tighten the bolt completely and then
reverse about half a turn so that the
ratchet is able to turn freely.
Screw the two small 4 x 13 mm screws
into the holes close to the ratchet.
These screw heads keep the ratchet in
position and limit its movement.
Screw the bumper with the 4 x 12 mm
screw onto the inside of the front post
on the right side.
Содержание Megado 110
Страница 2: ......