Lorex LNR340, Инструкция по эксплуатации

Страница: 70 / 195

52
Record
• Under Frame Rate , select the recording frame rate.
• Under Max Bitrate , select the bitrate that will be used for video streaming in Kbps. It is
recommended to select a value within the range shown under Max. Bitrate Range
Recommended .
Enter image quality settings for
continuous recording
Enter image quality settings for
motion recording
Select camera
6 Configure the above settings under Mainstream (Motion) to set the parameters for motion
recording.
7 (Optional) Use the Copy button to copy the selected settings to other channels. A warning
message may appear when copying settings to unconnected channels, but the NVR will copy
settings to all connected channels.
8 Click Apply to save changes. Right-click repeatedly to return to live viewing.
NOTE: If you get a "Bandwidth Exceeded" message, it is because you have set the combined
bitrate or framerate for all your cameras higher than the NVR can process. It is
recommended to set the bitrate and framerate to the following settings, based on the
number of channels your NVR has:
Recommended Frame Rate and Bitrate per Number of Channels
Number of Channels Frame Rate (frames per second) Bitrate (Kbps)
4 channels 30 8192
8 channels 30 4096
16 channels 15 3200
Configuring the Pre-Record and Post-Record Times
The NVR supports pre-recording to record video from before events (such as motion or
video loss) occur. The Pre-Record time determines how long the NVR will record before an
event occurs.
The Post-Record time determines how long the NVR will record after an event occurs.