Lonking LG833NG, Руководство пользователя

Страница: 75 / 134

75
5. Replace the transmission oil filter, engine oil filter and diesel filter element.
6. Clean up the return filter element of the hydraulic oil reservoir.
NOTE: please follow relevant operating procedures to replace the gearbox
transmission oil, drive axle lubricating oil and gearbox oil filter.
4.3OPERATION OF LOADER
4.3.1 INSPECTION BEFORE START UP OF ENGINE
1. Inspect the level of engine coolant.
2. Inspect the level of engine oil.
3. Inspect the level of hydraulic oil in the hydraulic oil tank.
4. Inspect the sealing property of each oil pipe, water pipe and part.
5. Inspect the wiring of battery, and, if the connection between electrode and cable of the
battery is loosened, tighten it up in time.
6. Inspect whether the tire pressure is correct.
Figure: Inspect the wiring of battery.
4.3.2 START UP OF ENGINE
1. Clear away the persons around the loader and the obstacles in the travelling direction
of the loader; inspect whether there is any person under the loader; except for the
driver who may sit in the cab for operating the loader, no other person may stand on
any portion of the loader.
2. Turn on the negative pole switch of the battery.
3. Go up and go down the stairs in accordance with the relevant safety provisions.
4. Adjust the rear view mirror, so as to obtain a good rear vision which is as closer to the
loader as possible.
5. Close the left and right doors of the cab.
6. Inspect whether the seatbelt is in good conditions, and then properly fasten the