Lonking LG833NG Скачать руководство пользователя | Manualshive

Страница: 29 / 134

background image

29

1.5.5 PRECAUTIONS WHEN THE MACHINE BEGIN TO RUN

Before operating the machine, again check the
states around the machine, make sure there is
nobody and obstacle there.

When the machine is running, sound the horn for
warning.

Only when the operator sitting down to the seat
that can start and operate the engine. Tie the
safety belt.

Make sure there is nobody in the cab except
the operator. It is not allowed that anyone sit
down on the body of the machine.
It shall be guaranteed that a reversing alarm is
in a normal working condition.

1.5.6 PRECAUTIONS WHEN THE MACHINE IS RUNNING

Do not turn the starter switch to the “OFF” position when running the machine. If the
engine stops during the running, steering will be very heavy. This is very dangerous. If the
engine really stops, perform braking to stop the machine.

Right and left glance is dangerous when operating the machine; therefore, the operator
shall concentrate on his work. Too fast traveling, sudden start, sudden stop, sudden turn
or zigzag traveling is dangerous.

If the machine is detected having any abnormal conditions during operating (abnormal
status of noise, vibration, smell and instrument display, gas or oil leakage), immediately
drive the machine to a safe place for check.

Adjust the height of working device below the boom and keep a clearance of 500-600mm
(20-24in) from the hinge pin and ground, let the machine walking on the level ground. Do
not operate the joystick of the working device during running. If it is necessary to operate
the joystick of working device, first stop the machine and then operate the joystick.

Do not suddenly turn the steering wheel, because the sudden turning will make the
working device touch the ground that may cause the machine to lose its balance, or
damage the machine or buildings around it.

Lower speed when running on an uneven road and do not suddenly turn the steering
wheel.

Try to avoid running over barriers, if it is necessary for the machine to moving across a
barrier, lower speed and let the working device close to the ground.

Keep distance with other machines or building structures to avoid collision during traveling

«
...
27
28
29
30
31
...
»

Содержание LG833NG







































































































































Отзывы:

Нет отзывов

Похожие инструкции для LG833NG

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды