2
1. General
This is a new kind of intelligent security product. It transmits alarm information to the user via telephone network
and is remotely controlled to deal with emergencies in time, ensuring user's personal and property safety. This
product has complete functions, flexible
configuration, strong destroy protection and convenient operations, being suitable for residences, stores, factories,
warehouses, banks, schools and hospitals, etc.
2. Main features and functions
●
Connect 8 or 16 programmable wired zones and 8 programmable wireless zones
●
Connect 4 keypads at most, each of them can extend 2 programming wired zones
●
Dial alarm center, user's cell phone or fixed telephone automatically with voice alarm while emergencies happen
●
Compatible with: ADEMCO 4+1 , Contact ID Communication protocol, it is capable of alarming in network or in
personal phone alone
●
Field monitor function
●
5 wireless remote controllers at most
●
Anti-tamper of the control panel and keypad, anti-snipping of keypad communication line
●
Optional accessories: probes of fire-proof and theft-proof; glass break detector, etc
●
Wireless learn code function with simple usage
●
Keypad programming and LED display
●
Restore user's password to factory defaults by hardware and restore the system factory defaults by software
●
Dial the alarm system via external telephone to arm/disarm in other places
●
Record 40 latest alarm events
●
3 groups timed auto-arm/auto-disarm time setting
●
Malfunction alarm: AC power fail, low voltage and telephone line loss
●
Set real-time clock inside
●
User addresses recording function
●
Programmable relay output
3. Terms definitions
Detector:
A facility that detects intrusion and abnormal state automatically via some electric or physical
methods and outputs switch signals or wireless signals to the system for disposal, then sends
out alarm signals, such as infrared detector, smoke detector, etc.
Protection Zone:
An area within the detection range of one or one ground detectors, described by numbers in the
system.
Bypass:
Close one of the zones temporarily, so that it can not alarm while activating the zones freely.
Arm-away:
The armed state while going out. All the zones without bypass are in alarm state.
Arm-stay:
The armed state at night. All the zones are in alarm state except active zone.
Disarm:
Cancel the alarm information that has happened. Close the entry/exit zones, active zones,
perimeter zones. Other zones are still in armed state.
24-hour zone:
No matter armed or disarmed, it is in effective detecting status. It is usually used in fire alarm,
plunder alarm and other emergent alarm which can be cancelled only by password holder.
19
10. Wireless remote controller operation
Wireless remote controller have 4 keys which can achieve operations of
arm away/stay, disarm and panic alarm without user password. Press
keys on the remote controller towards the control panel to perform
corresponding operations.
9.3.34 System defaults restoring Enter: 960
Operations: (PROG
→
user password
→
#)
→
960
→
#.
Functions:
After the operations, all parameters restore to defaults in factory setting except user password and
9.3.35 Keypad logout Enter: 990
Operations: (Program
→
user password
→
#)
→
990
→
#.
Functions:
After keypad logout, the keypad can not perform any operation to the system .User can remove keypad
from the control panel. Connect keypad to the control panel again for restoring the operation.
Note:
If remove keypad from the circuit without logout, the system will send out an alarm of keypad loss,
Arm away
Arm stay
Disarm
Panic
10.1 Arm-away
Press 'Away' key on the wireless remote controller, the system enters
arm delay status, status indicator on keypad keeps on, buzzer beeps
continuously. When arm delay is over, buzzer stops chirping.
10.2 Arm-stay
Press 'Stay' key on the wireless remote controller, the system enters arm
delay status, status indicator on keypad flashes, buzzer chirps once.
10.3 Disarm
Press 'Disarm' key, the system enters disarm status, status indicator on keypad is off, buzzer chirps once.
10.4 Panic
Press 'Panic' key for 2 seconds, the system will alarm automatically .The zone number is 17 and type is 'Panic'.
9.3.33 Zone type initialization Enter: 950
Operations: (PROG
→
user password
→
#)
→
950
→
#.
11. Remote telephone operation
User can dial telephone number of the control panel, and perform the operations: arm away/stay, disarm and field
monitor and hearing alarm types.
Dial telephone number of the control panel for more than ringing attempts set. The system will answer
automatically and announce the user with a sound 'Di'. Then user presses '# + 4 digits user pa 1 operation
digit + #, the control panel will operate corresponding commands.
6 operation digits,1 means arm-away, 2 means arm-stay, 3 means disarm,4 means field monitor ,5 means hearing
current alarm sounds,0 means hang-up / stop dialing to alarm.
For example, user password is 1234. To disarm the control panel, user can press '# 1 2 3 4 #' after switching on the
system. If the operations are performed correctly, 'Di' will be heard once. If the operations are performed
incorrectly, 'Di' will be heard twice.
Содержание LHD6000
Страница 2: ...INSTALLATION MANUAL ...
