16
TURnInG THE UnIT On
When the AC power cord is connected, the standby
indicator lights on. Press the
/ I
button to turn the unit
on, the standby indicator will blink for about 10 seconds for
loading, and will finally light off when the unit is ON. Press
the
FUnCTIOn
button to select the desired mode
(
DTV, TV,
AV1, AV2/SCART, YUV/SCART, DVD, iPod, HDMI or PC)
(HDMI is applicable to model L19LIDI9E / L19LIDI9WE /
L22LIDI9E / L22LIDI9WE only). If you select DVD mode,
the DVD logo will appear on the screen.
Note:
When the unit is not going to be used for a long time,
disconnect the AC power supply cord from AC outlet.
TURnInG THE UnIT On FOR THE FIRST TImE
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the
screen prompts as below to tune in the channels.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the
ENTER•OK
button to enter Auto Tuning
menu.
3. Use the / button to select the Country you are in.
4. Use the button to move to Start. Press the
ENTER•OK
button confirm Start. The system
will automatically start to scan and preset all available programmes.
5. After scanning has finished, the TV will display the first programmes stored.
BASIC OPERATIOn
PRE
PA
RA
TIOn
COnnECTIOnS
USInG
THE FEA
TURES
SPECIFICA
TIOn
TR
OUBLESHO
OT
In
G
USInG
THE D
VD / iPod
FEA
TURES
